10
GB
Battery Installation for the Remote Control
1. Press and slide the back cover to open the
battery compartment of the remote control.
Handling the Remote Control
• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time,
as it could cause corrosion or battery leakage and may result in physical injury and/or
property damage including fire.
Remote Control Operation Range
Point the remote control at the unit no more
than 5 metres from the remote control sensor
and within 60° of the front of the unit. The
operating distance may vary depending on the
brightness of the room.
2. Insert two AAA size batteries (not included).
Make sure to match the (+) and (–) ends of the
batteries with the (+) and (–) ends indicated in
the battery compartment.
3. Close the battery compartment cover.
30°
30°
Within about 5m
S1MDABI11E_IB_5L_120724_Zell.indb 10
24/07/2012 11:47 PM
