Optidrive E3 Set-up Guide
P a g e
|
5
3
Display & Keypad
The display can also show motor RPM.
To show RPM on the display, set the motor rated speed into parameter P-10:
1500
When the NAVIGATE button is pressed, the display will cycle from:
•
Output frequency
•
Output RPM
•
Output Current
•
Output Power
•
Output frequency………..
NOTE:
On high inertia loads (fans/flywheels etc.), if the display is required to show RPM, set parameter P-10 to
the synchronous speed of the motor:
2 pole – 3000
4 pole – 1500
6 pole – 1000
8 pole – 750
