35
Horizontal models CADB/T-HE 45 and 60
Due to the dimensions and weight of heat exchanger, the cleaning of it has to be perform in situ, without
disassembly the heat exchanger.
To access to the heat exchanger, disassembly the side panels of the heat recovery unit and proceed with
the cleaning by blowing with compressed air.
Loose the 4 closures that fi x the
access panel and remove the panel
Loose the screws that fi x the fi lter
and after released, remove it. Clean
the heat exchanger with blowing with
compressed air
Vertical models CADB/T-HE 04 to 100
Due to the dimensions and weight of heat exchanger, the cleaning of it has to be perform in situ, without
disassembly the heat exchanger.
To access to the heat exchanger, disassembly the side panels of the heat recovery unit and proceed with
the cleaning by blowing with compressed air.
11.4. CONDENSATION DRAINPIPE
Inspect the drainpipe regularly and make sure it is not blocked, if this is the case, remove the obstruc-
tion. Check that the drain pipe has been made in accordance with the “CONNECTIONS” section of this
manual.
