![Sandmartin STT4-HDR Installation & User Manual Download Page 3](http://html.mh-extra.com/html/sandmartin/stt4-hdr/stt4-hdr_installation-and-user-manual_807478003.webp)
the operating instructions or as marked on the unit. If you are not sure of the type of
power supply to your home, consult your local dealer or power company.
WARNING:
Do not open the housing on this unit, as this may expose you to dangerous
voltages and radiation.
WARNING:
The unit should be connected to a power supply only of the type descry bed
in the operating instructions or as marked on the unit. If you are not sure of the type of
power supply to your home, consult your local dealer or local power company.
WARNING:
Do not open the housing or touch any parts in the inner mechanism. Consult
your local dealer for technical service if the opening is required.
WARNING:
The mains plug is used as the disconnect device, the disconnect device
shall remain readily operable.
WARNING:
The battery of remote control should not be exposed excessive heat such as
sunshine, fire or the like.
WARNING:
Maintenance personnel must use the appropriate tools and replacement
parts as specified by the manufacturer.
Note:
Do not open the housing to avoid the unit direct exposure to radiation.
Unit Cleaning:
After the unit power is turned off, you can clean the housing, panel and
remote control with a soft cloth lightly moistened with a mild detergent solution.
Attachments:
Never add any attachments and/or equipment without the manufacturer
consent; as such additions may result in the risk of fire, electric shock or other personal
injury.
Locating:
Slots and openings in the housing are provided for ventilation to protect it from
overheating. Do not block these openings or allow them to be blocked by placing the
STB on a bed, sofa or other similar surface, nor should it be placed over a radiator or
heat register.
Power Cord Protection:
Place the power supply cord out of the way, where it will not be
walked on. Please take special attentions to cords at plugs, convenience receptacles and
the point where they exit from the unit.