24
Menu Operations
[Vol
◄
/
►
] to select character, press [OK] to confirm it.
After modification select “OK” of button bar and press [OK] on the RCU to
rename the favorite group name and leave the edit mode. Press [Exit] on the
RCU to exit the edit mode without saving the favorite group name.
4.9 Other
In “Other” menu;
1.
LNB Power: If your receiver is connected to the LNB directly then you need
to set the LNB Power to “On”. If your receiver is connected to a multi switch
(SMATV signal distribution system) then it may be that you don’t need to
provide the power to the LNB. But since this is depending on the kind of
installed distribution system we recommend you to contact your installer or
to refer to the user manual of this system to get the correct information.
You also just can change this setting and check if you still can receive the
channels. If the LNB Power is off and you still can see all channels then we
recommend this setting.
2. Channel Play Type: Press [Vol
◄
/
►
] to switch this function All, Free and
Scambled.
3. Beeper:
Press
[Vol
◄
/
►
] to switch this function On or Off