7
Menu Operations
2. Basic Operation
2.1 Switch on the STB
When the STB is first used it will display “Quick Setup” window. You can set Language, First Audio
and Second Audio and Country. Also you can search here your channels in “Cable search”. Please
press OK and you will see the window “Auto Scan”.
1.
You have to set the parameters of “First Frequency”, therefore use the number buttons of the
RCU.
2.
You have to set the parameters of “Second Frequency”, therefore use the number buttons of
the RCU.
3.
You have to set the parameters of “Symbol Rate”, therefore use the number buttons of the
RCU.
4.
Scan Mode: Press [
◄
/
►
] to switch this function “16QAM”, “32QAM”, “64QAM”, “128QAM”,
“256QAM”, “64QAMB” and “256QAMB”.
5.
NIT Search: Press [
◄
/
►
] to switch this function “Yes” or “No”.
6.
Moving the highlight to “Search” item and press [OK] key to start scanning.
?
Frequently Asked Question
Q: The power of my STB is on and it is running in TV mode but the TV screen shows nothing:
A: Make sure the TV set has been set to the correct video input (not the TV channels). For
example, if you have connected the unit to the video1 input of the TV set then you need to select
the corresponding input of the TV. Mostly it is done with the AV button of the TVs remote control
unit.
Q: My STB is running in TV mode but the TV screen shows nothing except one ball and “No
Signal”.
A: The signal of current TV channel is too weak. You can try to change to other channels with a
stronger signal. If the problems still exist, please consult your local dealer or installer for
technical service.
