Chapter 7. Playback Settings
69
7.15. Prevent Track Skipping
If this option is enabled, the ability to manually skip tracks is disabled in order to avoid
accidental track skips. It does not prevent changing tracks if a track ends, which can be
achieved by combining this option with
Repeat
set to
One
7.16. Rewind Before Resume
When restarting a track or a bookmark, a short rewind can be done before the playback
is started. This can be useful when listening to speech material, to help remember what
was being said just before playback was stopped. The size of the rewind can be set to
various values between 0 (off) and 60 seconds.
Note:
This option does not apply to resuming a paused track. Use the next option for
b
rewinding on pause.
Note:
The actual rewind distance may differ a little from the requested value, depending
b
on the file in question.
7.17. Rewind on Pause
This option rewinds the current track by a small amount whenever it is paused (not
stopped). The amount to rewind can be set between 0 and 15 seconds.
7.18. Frequency
This is the sampling frequency used for the rockbox playback engine. Audio at a different
sampling rate will be converted to this sampling rate prior to mixing using a cubic
Hermite polynomial resampler.
Note:
For best quality and battery life, select the sampling rate used by your audio.
b
This is typically 44.1kHz.
Note:
Opus files are always 48kHz.
b
The Rockbox manual
(version 3.14)
Sansa Fuze+
