Chapter 6. Sound Settings
61
Save EQ Preset.
This option saves the current EQ configuration in a
.cfg
file.
Browse EQ Presets.
This menu displays a list of EQ presets, as well as any EQ con-
figurations saved using the
Save EQ Preset
option. Users unfamiliar with the
operation of a parametric EQ may wish to use the presets instead of trying to
configure the EQ, or use the presets for designing their own custom EQ settings.
6.11. Dithering
This setting controls the dithering and noise shaping functionality of Rockbox.
Most of Rockbox’ audio file decoders work at a higher bit depth than the 16 bits used
for output on the player’s audio connectors. The simplest way to convert from one bit
depth to another is simply discarding all the surplus bits. This is the default behaviour,
and adds distortion to the signal that will vary in character along with the desired sound.
Dithering adds low-level noise to the signal prior to throwing away the surplus bits,
which gives the resulting signal a uniform noise floor which is independent of the sig-
nal. Most people find this noise preferable to the time-varying noise heard when not
performing dithering.
After dithering, noise shaping is performed. This basically just pushes the dithering
noise to the parts of the frequency spectrum humans cannot hear so easily. In Rockbox’
case, some of the noise is pushed up to above 10 kHz.
This setting will be put to its best use when listening to dynamic music with frequently
occuring quiet parts, classical music being a typical example. It is worth noting that the
effects of dithering and noise shaping are very subtle, and not easily noticable.
Rockbox uses highpass triangular distribution noise as the dithering noise source, and
a third order noise shaper.
6.12. Timestretch
Enabling
Timestretch
allows you to change the playback speed without it affecting
the pitch of the recording. After enabling this feature and rebooting, you can access
this via the
Pitch Screen
. This function is intended for speech playback and may
significantly dilute your listening experience with more complex audio. See section
(page
) for more details about how to use the feature.
6.13. Haas Surround
This setting implements the Haas effect with adjustable delay time to enhance the stereo
effect of the sound. A full range Haas effect creates the impression that sound starts from
one channel and ends in the other. Therefore, four additional functions are provided to
move the stage back to the center:
Balance
to change the left-right channel output
ratio.
A bypass band for frequencies that mostly contain vocals, using
f(x1)
, and
f(x2)
to set frequencies which are not affected. The
SIDE ONLY
setting uses mid-side
The Rockbox manual
(version 3.14)
Sansa Fuze+
