![background image](http://html1.mh-extra.com/html/sandisk/sansa-clip-v2/sansa-clip-v2_manual_3894408042.webp)
Chapter 5. The Main Menu
42
5.9. FM Radio
Figure 5.4.: The FM radio screen
This menu option switches to the radio screen. The FM radio has the ability to remember
station frequency settings (presets). Since stations and their frequencies vary depending
on location, it is possible to load these settings from a file. Such files should have the
filename extension
.fmr
and reside in the directory
/.rockbox/fmpresets
(note that
this directory does not exist after the initial Rockbox installation; you should create it
manually). To load the settings, i.e. a set of FM stations, from a preset file, just “play”
it from the file browser. Rockbox will “remember” and use it in
PRESET
mode until
another file has been selected. Some preset files are available here:
It is also possible to record the FM radio while listening. To start recording, enter the
FM radio settings menu with Long
Select
and then select
Recording
. At this point,
you will be switched to the
Recording Screen
. Further information on
Recording
can be found in section
(page
Key
Action
Left
,
Right
Change frequency in
SCAN
mode or
jump to next/previous station in
PRE-
SET
mode.
Long
Left
, Long
Right
Seek to next station in
SCAN
mode.
Volume Up
,
Volume Down
Change volume.
Home
Leave the radio screen with the radio
playing.
Power
Stop the radio and return to
Main Menu
.
Play
Mute radio playback.
Submenu
Switch between
SCAN
and
PRESET
mode.
Select
Open a list of radio presets. You can view
all the presets that you have, and switch
to the station.
Long
Select
Display the FM radio settings menu.
The Rockbox manual
(version 3.14)
Sansa Clip v2