![background image](http://html1.mh-extra.com/html/sandisk/sansa-clip-v2/sansa-clip-v2_manual_3894408071.webp)
Chapter 8. General Settings
71
8.6.2. Idle Poweroff
Rockbox can be configured to turn off power after the unit has been idle for a defined
number of minutes. The player is idle when playback is stopped or paused. It is not idle
while the USB or charger is connected , or while recording. Settings are either
Off
or
1 to 10 minutes in 1 minute steps. Then 15, 30, 45 or 60 minutes are available.
8.6.3. Sleep Timer
The
Sleep Timer
powers off your player after a given time, whether playing or not.
Start Sleep Timer (
duration
):
Shown when the
Sleep Timer
is inactive, this option
will initiate a
Sleep Timer
with the duration shown in brackets.
Cancel Sleep Timer (
remaining
):
Shown when the
Sleep Timer
is active, this option
will cancel the current
Sleep Timer
.
The time remaining before completion is shown in brackets.
Default Sleep Timer Duration:
The default number of minutes a new
Sleep Timer
will run for.
The values range from 5 minutes to 5 hours in 5 minute steps.
If a timer is currently active, the timer’s duration will be set to the newly entered
value.
The value set is persistent, see section
(page
Start Sleep Timer On Boot:
If set, a
Sleep Timer
will be initiated when the device
starts.
Restart Sleep Timer On Keypress:
If set, when a
Sleep Timer
is active and a key is
pressed, the
Sleep Timer
will be restarted with the initial duration.
8.7. Bookmarking
Bookmarks allow you to save your current position within a track so that you can return
to it at a later time. Bookmarks also store rate, pitch and speed information from the
Pitch Screen
(see section
(page
)). Bookmarks are saved on a per directory
basis or for individual (saved) playlists. You can store multiple bookmarks, even for the
same track. When there’s already a bookmark for a directory or playlist, new bookmarks
are added before existing ones.
Bookmarks are stored next to the directory or playlist they reference, in a file with the
same name as the directory or playlist and a “.bmark” extension. To load a bookmark,
select the bookmark file and then select the bookmark to load. There are other ways to
load a bookmarks mentioned below.
Note:
Bookmarking only works when tracks are launched from the file browser, and
b
does not work for tracks launched via the database. In addition, they do not work with
dynamic playlists.
The Rockbox manual
(version 3.14)
Sansa Clip v2