![background image](http://html1.mh-extra.com/html/sandisk/sansa-clip-v2/sansa-clip-v2_manual_3894408018.webp)
Chapter 2. Installation
18
installed over your current build.
The bootloader only changes rarely, and should not normally need to be updated.
Note:
If you use Rockbox Utility be aware that it cannot detect manually installed
b
components.
2.5. Uninstalling Rockbox
Note:
The Rockbox bootloader allows you to choose between Rockbox and the original
b
firmware. (See section
(page
) for more information.)
2.5.1. Automatic Uninstallation
You can uninstall Rockbox automatically by using Rockbox Utility. If you installed
Rockbox manually you can still use Rockbox Utility for uninstallation but will not be
able to do this selectively.
2.5.2. Manual Uninstallation
Copy an unmodified original firmware to your player, and then reboot into the Sandisk
firmware. See section
(page
) for more information.
If you wish to clean up your disk, you may also wish to delete the
.rockbox
directory
and its contents. Turn the Sansa off. Turn the player back on and the original Sansa
software will load.
2.6. Troubleshooting
“File Not Found”
If you receive a “File Not Found”
from the bootloader, then the
bootloader cannot find the Rockbox firmware.
This is usually a result of not
extracting the contents of the
.zip
file to the proper location, and should not
happen when Rockbox has been installed with Rockbox Utility.
To fix this, either install Rockbox with the Rockbox Utility which will take care
of this for you, or recheck the Manual Install section to see where the files need to
be located.
The Rockbox manual
(version 3.14)
Sansa Clip v2