– 6 –
3-6. Installing the throat plate auxiliary cover
[When using area 1306]
1) Temporarily fix throat plate auxiliary
cover supports A
❷
and B
❸
to the
machine bed with setscrews (M5)
❻
.
2) Move the cloth feed base to the rear,
and place throat plate auxiliary cover
❶
from between lower plate
❼
and
throat plate
❽
. At this time, be careful
not to bend lower plate
❼
.
3) Fix throat plate auxiliary cover
❶
with
throat plate auxiliary cover setscrews
❺
and washers
❹
.
❶
❹
❸
❺
❻
❷
❹
❽
❼
[Area 1306]
3-5. Safety switch
❶
Remove tape
❷
fixing the lever section of safety
switch
❶
.
1. When using the safety switch
without removing tape
❶
, it is very
dangerous since the sewing ma-
chine works even in the state that it
is tilted.
2. In case error 302 occurs when the
sewing machine works after setup,
loosen the safety switch
❷
fitting
screw with a screwdriver, and lower
the switch to the downside of the
sewing machine.
❷
WARNING :
Be careful not to bump your head or any other parts of your body against the throat plate auxiliary
cover when you bend over your work.