![background image](http://html1.mh-extra.com/html/sandisk/ams-210en-ip-420/ams-210en-ip-420_instruction-manual_4643769078.webp)
– 74 –
A
THREAD CLAMP button
Effective/ineffective of thread clamp is selected.
: Thread clamp ineffective
: Thread clamp effective
B
PRESSER DOWN button
Feeding frame and intermediate presser are lowered and the presser down
screen is displayed.
C
BOBBIN WINDER button
Bobbin thread can be wound.
→
Refer to
"II-2-11. Winding bobbin thread" p.49
D
PATTERN NO. SETTING
button
Pattern No. is set.
Registered pattern No. is retrieved using PLUS button
J
and MINUS button
K
.
E
PATTERN TYPE SETTING
button
Pattern type is specified. The pattern type is changed over among the following
three different ones using PLUS button
J
and MINUS button
K
to select a
desired one.
: User’s pattern
: Vector form data
: M3 data
: Standard format of sewing
: Direct pattern
The selected pattern type is indicated on edit data display
Q
.
*A type to which no pattern is registered cannot be selected.
F
PATTERN LIST button
Pattern No. and type which are currently selected are indicated on the button.
When the button is pressed, the selected pattern list screen is displayed for the
pattern selection.
G
NEEDLE THREAD
TENSION SETTING
button
The current needle thread tension reference value is indicated on the button.
When the button is pressed, the thread tension reference value can be changed.
During the setting procedure, the thread tension reference value is indicated on
edit data display
Q
.
The thread tension value is increased/decreased in increments of 1 using PLUS
button
J
or MINUS button
K
.
→
Refer to
"II-2-6. Changing item data" p.41
.
H
MAX SPEED LIMITATION
SETTING button
The current max. speed limitation is indicated on the button. When the button is
pressed, the max. speed limitation can be changed. During the setting procedure,
the max. speed limitation is indicated on edit data display
Q
.
The max. speed limitation is increased/decreased in increments of 100 sti/min
using PLUS button
J
or MINUS button
K
.
→
Refer to
"II-2-6. Changing item data" p.41
.
I
INTERMEDIATE
PRESSER HEIGHT
REFERENCE VALUE
SETTING button
The current intermediate presser height reference value is indicated on the
button. When the button is pressed, the intermediate presser height reference
value can be changed. During the setting procedure, the intermediate presser
height reference value is indicated on edit data display
Q
.
The intermediate presser height reference value is increased/decreased in
increments of 0.1 mm using PLUS button
J
or MINUS button
K
.
→
Refer to
"II-2-6. Changing item data" p.41
.
J
PLUS button
The value for the selected item is increased in increments of the reference unit.
K
MINUS button
The value for the selected item is decreased in increments of the reference unit.
L
PATTERN NAME display
The name of the currently selected pattern is displayed.
Button and display
Description