![background image](http://html1.mh-extra.com/html/sandisk/ams-210en-ip-420/ams-210en-ip-420_instruction-manual_4643769012.webp)
– 8 –
❶
❷
❸
3-8. Attaching the pedal chain (For S specification only)
❶
❷
3-9. Installing the thread stand
1) Assemble the thread stand, and put
it in the hole in the top left corner of
the machine table.
2) Tighten locknut
❶
to fix the thread
stand.
3) When ceiling wiring is possible, pass
the power cord through spool rest
rod
❷
.
Connect the machine
❶
and manual pedal
❸
with
chain
❷
.
When you tilt the sewing machine, be
sure to tilt it after removing chain
❷
from manual pedal
❸
.
3-7. Installing the panel
1) Installing the IP-420
❹
❸
❶
❷
1) Open cover
❶
and remove cable
❷
once.
Then connect it again to the panel on the top
surface of the table after passing it through the
hole in the table.
2) Fix operation panel installing plate
❸
to an op-
tional place on the table with two wood screws
❹
.
Install the panel at the position where
X-move cover or head grip does not
interfere with it since breakage of the
panel will be caused.