3
SANDENVENDO SPECIFICATION FOR
ELECTRONIC BOARD SF01
HARDWARE FEATURE
Power supply : 24 Volt AC 2 A rms
14
Motor outputs 24 VDC 1 A
14
Motor micro-switches
14
Sold-out micro-switches
14
Sold-out leds
26
Selections switches
1 Door switch
3 Analogics inputs (for temperature control)
1 Real time clock
1 Jack plug for DEX/UCS audit output.
1 Serial TTL output.
The board uses an XA 16bit micro-controller with up to 4096 Kbit of program eprom and
256 Kbit of Eprom memory used to store Setting and audit.
External slave board (on master VMC placed near main board) used to drive the vending
motors with current control and limitation.
External slave board (for slave VMC) used to drive the vending motors with current
control.
External slave Optical detector board (optional for master and for slave) used to check
the product delivery.
External slave Lift power board (optional only for master) used to drive lift motor.
External slave fluorescent display 2 lines 20 characters
Master and Slave optically isolated serial link for MDB
EXECUTIV
SOFTWARE FEATURE
Service Programming routine
Credit Accumulation
Coin Mechanism Interface
Consumer Manipulation and Vend process
Multi pricing
Escrow
Correct change Indicator
Manual Payout
Manual Tubes filling
Saved Error listing
Master slave capability
Cooling unit controlled by separate electronic thermostat
Summary of Contents for Vendo G-SNACK
Page 1: ...G SNACK G SNACK PLUS MASTER SLAVE PROGRAMMING MANUAL...
Page 3: ...2...
