S&C SpeedNet Instruction Sheet Download Page 56 | Manualshive

Page: 56 / 62

S&C SpeedNet Instruction Sheet Download Page 56

56 S&C Instruction Sheet 1072-530

SpeedNet Client Tool

Statistics Window,

Ethernet Tab

Figure 83. The Ethernet statistics window.

The

Statistics

window has several tabs that provide statistical information regarding

interface traffi c, protocol data, and routing. This section contains descriptions of each
statistic that is available through the SpeedNet Client Tool.

The

Ethernet

tab, shown in Figure 83, provides the following statistical information

regarding the performance of the SpeedNet Radio’s Ethernet interface:

• Bytes received

—Total number of bytes received by the SpeedNet Radio’s Ethernet

interface; the bytes received, together with the bytes sent, represent the total data
transfer of all communications links involving the Ethernet interface

• Unicast frames received

—The total number of single destination (unicast) frames

sent to the SpeedNet Radio’s Ethernet interface

• Non-Unicast frames received

—The total number of non-unicast frames sent to the

SpeedNet Radio’s Ethernet interface

• Receive errors

—

The total number of receive errors

• Received frames dropped

—The total number of frames received by the SpeedNet

Radio’s Ethernet interface that were discarded

• Unknown protocol received

—

The total number of frames received by the SpeedNet

Radio’s Ethernet interface with unidentifi ed protocol errors

• Bytes sent

—The total number of bytes sent by the SpeedNet Radio’s Ethernet interface

• Unicast frames sent

—The total number of single destination (unicast) frames sent

from the SpeedNet Radio’s Ethernet interface

• Non-Unicast frames sent

—The total number of non-unicast frames sent from the

SpeedNet Radio’s Ethernet interface

• Transmit errors

—The total number of transmit errors; this error is received from the

application device and may indicate a problem with the IntelliRupter fault interrupter

• Transmit frames dropped

—

The total number of frames transmitted and then

discarded; this error is received from the application device and may indicate a problem
with the IntelliRupter fault interrupter

• Output queue length

—An error received from the application device that may

indicate a problem with the IntelliRupter fault interrupter on the application device
that may indicate a problem with the IntelliRupter

«
...
54
55
56
57
58
...
»

Summary of Contents for SpeedNet































































Reviews:

No comments