54 S&C Instruction Sheet 1072-530
SpeedNet Client Tool
Admin Window,
Firmware Tab
Figure 81. The Firmware admin configuration window.
The
Firmware
tab, shown in Figure 81, is used to upgrade the fi rmware installed on the
SpeedNet Radio. The following parameters can be confi gured:
• File
—Use the
Browse
button to specify the location of the fi rmware fi le to be uploaded
• Upgrade
—After selecting the fi rmware fi le, click the
Upgrade
button to initiate
an immediate fi rmware upgrade. The SpeedNet Radio will prompt for reboot at the
conclusion of the upgrade. Power should not be cycled while a radio is upgrading
fi rmware. You will need to log in to the radio again once the post-upgrade reboot is
completed to do further work with the radio. It is recommended that users log in to the
radio after the post-upgrade reboot and confi rm the new fi rmware loaded by accessing
the confi guration window shown in Figure 80 on page 53
NOTICE
If the radio loses power during a firmware upgrade process, the radio will continue to
use the firmware version that was installed before the attempted firmware upgrade.
Admin Window,
Shell Tab
Figure 82. The Shell admin configuration window.
