background image

  

S&C Instruction Sheet 1072-530

  

51

SpeedNet Client Tool

Security Window,

Encryption Tab

Figure 78. The Security encryption configuration window.

The 

Security

 window provides a list of tabs that can be used to view and set up the security 

confi guration of the SpeedNet Radio. Selecting a tab will provide a list of confi gurable 
options.

The

 Encryption

 tab, shown in Figure 78, can be used to enable or disable encryption, 

change encryption keysets, and upload network and security configuration files. The
following parameters can be configured:

•  Set Network Confi guration

After creating a network confi guration fi le using the 

SpeedNet KeyGen Utility (see the “Network Confi guration” section on page 22), this 
option allows administrators to upload the network-confi guration fi le to the SpeedNet 
Radio. Click the 

Browse

 button to locate the network confi guration fi le, which will 

have a .dat fi le extension. Click the 

Upload

 button to insert the network confi gura-

tion into the SpeedNet Radio. Note that the network-confi guration fi le loaded into a 
particular radio must either be encrypted with that radio’s MAC address (for initial 
confi guration) or with a keyset loaded into that radio.You will be prompted to log in to 
the SpeedNet Client Tool after the network confi guration has been applied. Note that 
after a radio is reset to the factory setting, the network confi guration and/or setting 
the security confi guration are the only actions allowed on that radio

•  Set Security Confi guration

After creating a security confi guration (.rss) fi le using 

the SpeedNet KeyGen Utility (see “Generating a Security File” on page 17), this option 
allows administrators to upload the security confi guration fi le to the SpeedNet Radio. 
Click the 

Browse

 button to locate the security confi guration fi le, which will have an 

.rss fi le extension. Click the 

Upload

 button to insert the security confi guration into 

the SpeedNet Radio. You will be prompted to log in after the security confi guration 
has been applied. Note that after a radio is reset to factory settings, network confi gura-
tion and/or setting security confi guration are the only actions allowed for that radio

•  Keyset

—Specifi es the encrypted keyset currently being used. All SpeedNet Radios 

within the network must use the same keyset in order to communicate with each other.

•  Use Latest

—Click the 

Use Latest 

button to use the keyset with the highest keyset 

number. 

All radios must use the same keyset in order to communicate

Summary of Contents for SpeedNet































































Reviews: