627-500 12
INSTALLATION
Access to Interior
To Open Doors and Panels
Enclosure Door
Step 1
The non-removable manual handle rotates for
door opening. As illustrated in Figure 3, open
the door by moving the handle clockwise 90°
until door is unlatched.
Step 2
Pull the door open and secure it with the
doorstop.
Ç
CAUTION
Do not apply undue force to any door
handle when attempting to open a door.
The use of undue force may damage the
door handle and latching mechanism,
or an interlock may be jammed. Verify
that the snap locks are unlocked and
that opening the door is in the sequence
dictated above.
Rear Access Panel
Step 3
The rear access panel employs a pentahead/
hexhead bolting scheme. There are three
bolts located on the panel: Two hexhead
bolts located each at the top and the bottom,
and a pentahead bolt in the middle covered
by a protective hood; see Figure 4. Using the
appropriate socket wrench or tool, loosen and
remove the bolts by rotating the tool counter-
clockwise.
Step 4
Pull the panel open and secure it with the
doorstop.
Figure 3. Non-removable manual handle—requires rota-
tion of 90° to open or close door. Handle is padlockable. A
snaplock is also pictured.
Figure 4. Pentahead bolts secure the rear access panel.
Snap lock
Rotate handle
90° to open