4.2 Change Password
Use this SMS message example shown below to change the password of CT-58. For example, by
following the example below, you will change the default password, “0000” to a new password,
“1111”.
Setup format
#「
username
」
,
「
Password
」
,
「
Function Code
」
,
「
new Password
」
,
「
new Password
」*
Example
:#
username,0000,2,1111,1111
*
The table 4.2.1 describes the meaning of each segment in the message above.
Table 4.2.1
The table 4.2.2 shows each confirmation message reply after setup
Table 4.2.2
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58.
If you have changed the username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
2
Mode 2 defines to change the password
1111
New password
1111
Reconfirm the password
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + GC101 Password is updated.
Setup Fail
[username] + Password setup Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or SMS
format
[username] + command error
CT-58 is in Emergency Mode [username] + in emergency, changing password is not allowed.