4.4 Set up a Host Name (URL) to Transmit Data
This command (SMS) instructs the CT-58 to access an URL or fixed IP for data transmission. If you
send
the
SMS
according
to
the
example
seen
below
to
CT-58,
the
URL
“http://www.sanav.com/eric-gga/gprs.aspx “ will be assigned to receive the data sent from the
CT-58. Please note that the question mark “?” or any symbol is not allowed to be keyed in behind
the URL. The CT-58 will add the necessary symbol(s) on automatically.
Setup format
＃「
username
」
,
「
Password
」
,
「
Function Code
」
,
「
Fixed IP or URL
」＊
Example
：＃
username,0000
，
4,http://www.sanav.com/eric-gga/gprs.aspx
＊
The table 4.4.1 describes the meaning of each segment in the message above.
Table 4.4.1
The table 4.4.2 is showing each confirmation message reply after setup.
Table 4.4.2
Text Keyed In SMS
Description
#
Start sign.
username
Default ID of CT-58.
If you have changed the Username, please use
the updated one.
0000
Default password.
If you have changed the password, please use
the updated one.
4
Mode 4 defines to trasmit data to a specific website
http://www,sanav.com/eric-gga/gprs.aspx Default domain name, Sign “?” is not allowed to write
in the area.
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + CT-58 IP/Domain is updated.
Setup Fail
[username] + IP/Domain setup Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or command
format
[username] + command error
CT-58 is in Emergency Mode
[username] + in emergency, IP/Domain setup is not allowed.
