4.7 All Parameters Reset to Default
Use this SMS message to reset CT-58 to factory default. You can just send the SMS according to
the example seen below. It will overwrite all the current parameters to default.
Setup format
＃「
username
」
,
「
Password
」
,
「
Function Code
」＊
Example
：＃
username,0000,9
＊
The table 4.7.1 describes the meaning of each segment in the message above.
Table 4.7.1
The table 5.7.2 shows each confirm message reply after setup.
Table 4.7.2
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
9
Mode 9 defines to change all the parameter to default value
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + Setup OK. CT-58 resets to default
Setup Fail
[username] + Reset Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or command
format
[username] + command error
CT-58 is in Emergency Mode
[username] + in emergency, reset to default is not allowed.
