5. Respond Messages
This chapter shows you how to read and understand the different response messages sent from CT-58. Basically, there’re
7 different situations that trigger the CT-58 to response its position (
Auto Report, SMS Polling, Park, Move, GFIN, GOUT,
UNPA, vibration, SOS
) and are shown in the following pages.
Event Table:
This event table helps you to know what event triggers the response.
Event
Descriptions
AUTO
When the monitor sends a valid Auto Report command to CT-58, it will send a
report including an “Auto” behind each GPRMC sentence.
MOVE
When CT-58 exceeds the speed limit in Park mode, it will trigger the “Move” event
and start sending report according to the setting.
POLL
When using the SMS to poll the report, the event will be “poll”.
GFIN
When CT-58 enters the geofence area, it triggers the “GFIN” event.
GOUT
When CT-58 moves out from the geofence area, it triggers the “GOUT” event.
PARK
When the park function is triggered, CT-58 will send a report with “PARK” at the
report ended
UNPARK
When to deactivate function, CT-58 will send a report with “UNPARK” at the report
ended.
SOS
When Panic button is pressed, the report sent from CT-58
Vibration
When the vibration function is triggered, CT-58 will send a report with “PARK” at
the report ended
