73
5-8
MEDIA
You may use CCTV, S-VIDEO, external speaker, microphone
5-9
Set up and Test
1 You should place the rubber cover to the connector not in use at the back of the display unit.
All connector must be connected to the plug and display unit must be installed at the right
place.
2 If this equipment is set with bracket mounting, to optimize the view of screen, adjust the
slope and rotate it and tighten the knob.
3 Insert the NAVIONICS card
4 Input the setting data to set the optional equipment as sensor or to adjust the equipment to
meet your requirement.
5 From the Satellite information page, check that GPS satellite information displays. Wait until
GPS satellite gets changed to ‘Used in fix’ and GPS receiver operates.
MEDIA
Cable
S-VIDEO
CCTV
Extnl. Speaker
MICROPHONE
POWER +12V
Pin No.
Details
1
VIDEO_GND
2
VIDEO_GND
3
VIDEO_Y
4
VIDEO_C
S-VIDEO PIN MAP
User Guide
74
Menu Tree
Main menu
1. Introduction 1-1 General Information
1-2 Specification
1-3 Components
1-4 Optional accessories
2. Getting Started 2-1 Installation 2-1-1 Bracket mounting
2-2 Button
2-3 NAVIONICS SD Card, USB
2-4 Selection of map
2-5 Simulation
2-6 Data bar
2-7 Compass
2-8 Multi display
3. General Operation 3-1 Power on, off
3-2 Brightness, night mode, background
3-3 Main display
3-4 Map 3-4-1 Map display
3-4-2 Longitude and Latitude
3-4-3 Chart Scale
3-4-4 NAVIONICS Search
3-4-5 SAMYUNG MARP Search
3-5-6 Symbol and information
3-4-7 Navigational information
3-4-8 Get to waypoint or point in a chart
3-4-9 Follow the route
3-4-10 Distance and bearing calculator
3-4-11 Projected course
3-4-12 Select mark from chart
3-4-13 Set tracks from the chart display
3-4-14 3D map
3-5 Video 3-5-1 Option
3-6 Fishfinder 3-6-1 Screen setting
3-6-2 Mode
3-6-3 Single or dual frequency fish finding
3-6-4 Range
3-6-5 Gain
3-6-6 Fish finder
3-6-7 No division of window
3-6-8 Split enlargement or full screen zoom.
3-6-9 Enlarge lowland
3-6-10 Dual frequency display(50/200)
3-6-11 A-Scope display
