Samwontech TEMP2020 series Operation Manual Download Page 14

Page: 14 / 75

SAMWONTECH

1st Edition of TEMP2020_Series IM : Dec. 15. 2008 Page 11 / 71

3.2.2 The 1

FIX RUN screen

▶

This screen displays Process Value, Set Point, Control Output and Lamp Operation Status.

▶

Set Point Input Key is displayed during operation when touch “SP” part.

▶

Able to select Asynch/Synch Operation at [4. F UNCTION & FIX OPERATION].

▶

Asynch Operation has individual STOP/RUN button, and user can STOP/RUN the required Channel.

▶

Following is the RUN Screen for CH1, CH2.

①

Displays CH1 operation status.

☞

The arrow rotates clockwise during operation.

②

Displays CH1 Set Point.

③

Red status lamp in CH1 indicates “ON”, and dark gray for “OFF” status.

☞

Status Lamp can be set at [SYSTEM INITIAL SET Screen] in [Installation Manual].

☞

Up to 20 Status lamp per channel can be set at [SYSTEM INITIAL SET Screen], and only 16 status
lamps are displayed at [The 1

FIX RUN screen].

☞

Only 8 Status lamps are displayed when User Tag is set.

☞

[The 2

FIX RUN screen] displays all 20 lamps that are set.

④

Displays CH1 operation status.

☞

The arrow rotates clockwise during operation.

③

⑥

⑤

⑦

②

⑧

⑨

⑩

⑪

⑫

[Figure 3-5] The 1

FIX RUN screen (Asynch)

①

④

[Figure 3-6] The 1

FIX RUN screen (Synch)

⑬

⑭

⑮

Summary of Contents for TEMP2020 series












































































Search results

Summary of Contents for TEMP2020 series

Reviews:

Related manuals for TEMP2020 series

Brands by name

Popular brands

Samwontech TEMP2020 series, Operation Manual

Search results

Summary of Contents for TEMP2020 series

Reviews:

Related manuals for TEMP2020 series

Brands by name

Popular brands