Samwontech TEMP2020 series Operation Manual Download Page 61

Page: 61 / 75

SAMWONTECH

1st Edition of TEMP2020_Series IM : Dec. 15. 2008 Page 58 / 71

6.2 TREND GRAPH view & DATA processing

▶

This screen is to open specific recorded trend data file at the [3.3.4 The 3

PROGRAM RUN screen] or

[3.2.4 The 3

FIX RUN screen] and show that trend data by graph.

▶

The title of this screen on the top of the window shows the open file name, indicating record date and
time.

①

Displays Set Point, Process Value and Control Output value.

☞

It will disappear from graph screen when pressing the checked button, and will appear again when
pressing the

button.

☞

Refer to [Figure 6-5, Figure 6-6 GRAPH & STORAGE SET Screen-2].

②

Button to move to the previous / next screen.

③

Button to display the first / last section of current trend data graph.

④

Page move button to the next / previous page of current trend data graph.

⑤

Button to move the view point (Blue line) up / down by 1 dot point of current trend data graph.

☞

The value where the view point (Blue line) is indicating of each item will be displayed at ① box, and
the view point can move alone with ⑤ button or as user touch black part of this screen.

▶

This screen is displayed when there is no selected item in Set Point, Process Value and Control Output
value.

①

②

③

④

⑤

[Figure 6-5] GRAPH & STORAGE SET Screen-2(Graph Display selected)

[Figure 6-6] GRAPH & STORAGE SET Screen-2(Graph Display not selected)

Summary of Contents for TEMP2020 series












































































Search results

Summary of Contents for TEMP2020 series

Reviews:

Related manuals for TEMP2020 series

Brands by name

Popular brands

Samwontech TEMP2020 series, Operation Manual

Search results

Summary of Contents for TEMP2020 series

Reviews:

Related manuals for TEMP2020 series

Brands by name

Popular brands