SAMWONTECH
1st Edition of TEMP2020_Series IM : Dec. 15. 2008 Page 25 / 71
▶
“Set Point”, “Pattern No.” input method for CH1 PROGRAM OPERATION, CH2 FIX OPERATION is as
follows.
▶
Input key is displayed when touching “Pattern No” area in the screen for CH1 pattern no. input.
▶
Input key is displayed when touching “Set Point” area in the screen for CH2 set point input.
Table 3-4. FIX AND PROGRAM STOP Screen Parameter
Parameter
Range
Unit
Default
CH1 Pattern No
1~40
ABS
1
CH2 Set Point(SP)
CH2.EU(0.0 ~ 100.0%)
CH2.EU
CH2.EU(0.0%)
[Figure 3-27] Pattern Number Input Screen-4
[Figure 3-26] Pattern Number Input Screen-3
