Samwontech TEMP2020 series Operation Manual Download Page 50

Page: 50 / 75

SAMWONTECH

1st Edition of TEMP2020_Series IM : Dec. 15. 2008 Page 47 / 71

5.3 Pattern FILE EDIT

▶

Press [FILE EDIT] button on PROGRAM SET menu screen to enter into this screen.

▶

This screen is to edit program by copy or delete pattern set on [5.1 Program PATTERN].

▶

Currently processing pattern can not be deleted.

▶

Deleted pattern can not be restored.

①

Setup box to input number of original pattern.

②

Setup box to input number of the first / last target pattern to paste.

☞

If setting ‘0’ at END PATTERN, only START PATTERN will be copied.

③

Displays total number of pattern set on [5.1 Program PATTERN].

☞

This Displays is just READ ONLY and cannot be changed by itself.

④

Displays total number of segment set on [5.1 Program PATTERN].

☞

This Displays is just READ ONLY and cannot be changed by itself.

⑤

Setup box to input number of the first / last target pattern to delete.

☞

If setting ‘0’ at END PATTERN, only START PATTERN will be delete.

⑥

Button to paste the original pattern at ① to the target pattern at ②.

⑦

Button to delete patterns at ⑤.

⑧

Button to delete all patterns.

[Figure 5-4] FILE EDIT screen

①

③

④

②

⑤

⑥

⑦

⑧

Summary of Contents for TEMP2020 series












































































Search results

Summary of Contents for TEMP2020 series

Reviews:

Related manuals for TEMP2020 series

Brands by name

Popular brands

Samwontech TEMP2020 series, Operation Manual

Search results

Summary of Contents for TEMP2020 series

Reviews:

Related manuals for TEMP2020 series

Brands by name

Popular brands