manualshive.com logo in svg

Samwontech TEMI770, Manual

Share
Download
Samwontech TEMI770 Manual Download Page 5

                                                                                                                                                                       

I. INSTALLATION 

  IM TEMI 770E_C 2nd Edition: Sep. 1. 2003.                                                                                                                1/15 

1. Introductions and Power Unit 

 

Thank you for purchasing our Industrial Controller. 

This manual explains suitable effective way of using and installing this product. 

Please read carefully to apply it to controller of environmental chamber or others. 

 

1-1. Introduction 

 

               

Regarding This Document 

                      (1) Keep the manual for the last user who can get easy access to the manual. 

                      (2) Make sure read this manual carefully and fully understand how to operate this product. 

           (3) This manual is intended to describe the functions of this product.  

                            Samwontech Co., Ltd.(hereinafter simply referred to as We) does not guarantee the application 

of these functions for any particular purpose. 

           (4) Redistribution & use this manual, with or without modification, are prohibited. 

                      (5) The contents of this manual are subject to change without prior notice. 

                      (6) Every effort has been made to ensure accuracy in the preparation of this manual. However,   

should any errors be found or important information be omitted, please contact your nearest our   

representative or our sales office. 

 

                 

Regarding Protection, Safety and Prohibition 

           (1) In the interest of protecting and ensuring the safety of this product and the system, which is 

controlled by this product, ensure that all instructions and precautions and precautions in this 

manual relating to safety are strictly adhered to in the use of this product. 

                      (2) Take note that if you handle the product in contradiction to these instructions, we does not   

guarantee safety. 

                      (3) If separate protection and/or safety circuits are to be installed for this product or the system, which 

is controlled by this product, ensure that such circuits are installed external to the product. 

                      (4) When you replace parts or consumables of the product, use those specified by us. 

 

                 

Limited WARRANTY 

           (1) We makes no warranties regarding the product except those mentioned in the WARRANTY. 

(2) In cases where the use of this product results in damage or loss to the user or a third party, we will   

not be responsible for any incidental or consequential damage or loss, or any damage or loss   

suffered by the user or third party resulting from a defect or defects in this product which could not   

be foreseen by us. 

 

 

 

Summary of Contents for TEMI770































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands