12
Operating Procedures cont’d ...
!
When attaching any of the blades to the SAMURAI Floor
Stripper, the beveled edge of the blade must be used as
shown in Fig.14.
Fig.14:
Verify that beveled
edges on blades are facing the
right direction.
!
Blade is sharpened on BOTH sides.
Take care when handling.
Fig.8:
Ensure that all necessary
pieces are available.
Fig.9:
Fasten support mount to
plate extension.
Fig.10:
Fit extension assembly
to vibrating plate.
Fig.11:
Bolt extension to machine.
Fig.12:
Slide blade in
between support mount
and extension plate.
Fig.13:
Tightening nuts with
nut driver
