background image

16

Maintenance Procedures

 

The following are general guidelines for servicing common wear components on the SAMURAI Floor stripper.  ALL 

MAINTENANCE AND SERVICE WORK MUST BE PERFORMED BY A TRAINED AND EXPERIENCED TECHNICIAN.  Ensure 
that the work area is clean and free of debris prior to starting any maintenance or service work.  Small particles may 
become trapped in key components that may lead to serious damage to the machine and cause severe bodily harm to the 
operator or technician.

 

 
 

Before performing any service and maintenance procedures, consult these general safety procedures for a safe 

working environment.

1.  Make sure that the motor is cool prior to any service or maintenance work.
2.  Verify that work area is clean and free of any debris, tripping or fi re hazards, and other potential sources of 

danger.

3.  Always wear proper safety clothing and equipment for the job.  These can and should include eye and ear 

protection, protective helmets, gloves, dust mask and any other items that are appropriate for the job and 
jobsite requirements

4.  Ensure that the technician has tied back or remove any loose hair, clothing and any other potential hazards 

and obstructions

 

The SAMURAI is designed to be a low-maintenance unit.  Provided that the unit has not been subjected to abuse 

or misuse, there are very few service items required.  By following the Inspection Schedule below, BEFORE and AFTER 
each use of the fl oor stripper, appropriate actions can be taken to extend the service life of the machine and reduce any 
costly repairs and unnecessary downtime for the unit.

!

All service should be performed by trained 
technicians.

!

ALWAYS consult and verify that all local codes and bylaws are followed 
before performing any service or maintenance procedures.

Technician should read and thoroughly understand all manuals pertai-
ning to the machine to be serviced.  Do NOT proceed with any service and 
maintenance activity until ALL questions and concerns have been addressed.  
Please call your local authorized dealer for technical support and advice.

!

Use SAMURAI brand-name parts for compatibility and optimum performance.

Use of any other parts prior to consulting with your authorized centre will void 
all warranties expressed herein.

!

Summary of Contents for Industrial Floor Stripper





























Reviews: