SUPPLEMENTAL
Argus Installation and Resource Guide
30
4.
With the number of detectors and appropriated placement determined, take the metal
template mark the location of each of the three holes per detector on your pipe.
Note
: The template holes should be lined up along the length of the pipe, not around the
pipe. Incorrect installation will result in detector failure.
Figure 1: Mark the holes using the template
5.
With the holes marked take the
¼
” drill bit from the installation kit and using a drill, cut
out the marked holes. Ream out the outside holes a small amount for easier bolt
installation.
Figure 2: Drill each marked hole using the ¼” bit
Summary of Contents for Argus
