English _11
●
●
in
St
aLL
ation & connection
connectinG witH otHer Device
J
`
The CVBS out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes.
`
The Micro USB out terminal of the product is provided for easier installation, and is not recommended for monitoring
purposes.
ethernet connection
Connect the Ethernet cable to the local network or to the Internet.
connecting wi-fi
camera Setup
1.
Connect OTG gender (5-pin) and WiFi dongle to the micro USB terminal.
Smartphone Setup
1.
Install the Wisenet Installation application.
2.
Select the camera SSID after turning on the WiFi.
3.
Run the Wisenet Installation application.
4.
When you log in to the camera, the video will be connected. (initial password: 4321)
`
The video will be played without being logged in during the initial connection.
5.
The camera angle can be adjusted through the smartphone video.
SOFT AP
Monitor to install
Ethernet
Power
Wi-Fi dongle
recommended dongle manufacturer
Manufacturer
Model
NETIS
WF2123 n300
EDIMAX
EW-7811Un
IP Time
N100mini
TP-LINK
TL-WN823N V1
ASUS
USB-N13
NETGEAR
WNA3100M
power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the
camera.
J
`
When supplying PoE and DC 12V or PoE and AC 24V power at the same time, the equipment is powered by the external
source (AC 24V, DC 12V).
-
You can also use a router featuring PoE to supply power to the camera.
-
Use PoE that is compliant with the IEEE 802.3af protocols.
-
It is recommended to use a single source for powering the equipment among PoE, DC 12V and AC 24V.
`
Be careful not to reverse the polarity when you connect the power cable.
`
AC 24V can be connected in non-polar union.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
Connect the set and the adapter power line first, and then connect the power cable to the outlet on the wall.
power cable Specification for each model
Input power
Wire Type (AWG)
Cable Length (Max.)
DC 12V
#18
19m
#16
30m
AC 24V
#20
26m
#18
40m
network cable Specification
Item
Contents
Remark
Connector
RJ45
Ethernet
10/100Base-T
10/100 Mbps
Cable
UTP Category 5e
Max Distance
100M
PoE Support
IEEE 802.3af
