4-16
4. Troubleshooting
4-1-5. No Video (Tuner DTV)
Symptom
Audio is normal but no picture is displayed on the screen.
-
Major
checkpoints
Check the DTV source
Check the Chelsea
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
-
-
Caution
Make sure to disconnect the power before working on the PD board.
Diagnostics
No
Check TU5001
Change the main PCB assembly.
No video
No
Check the RF source and
check the connection of RF cable?
Yes
Does the digital data appear
at pin15, 16 of TU5001?
Yes
Input the RF signal.
Check the connected cable.
Yes
7
Yes
Check the LVDS cable?
Replace the LCD panel?
Please, contact Tech support
No
Does the digital data appear at
pin14~42 of CN7005?
No
Check IC7001
Change the main PCB assembly.
5
Summary of Contents for UA40B7000WM
