Samsung SVR-1645 User Manual Download Page 85

Page: 85 / 122

User Manual

This turns NTP on or off.

NTP Mode

This sets NTP Mode to Client, Server or All.

NTP Server Location

This is enabled when NTP Mode is set to Client. This determines whether the NTP server is on

a local network or on the Internet.

NTP Local Server IP

This is enabled when the NTP Server Location is set to Local and is used to set the IP of the

NTP server. Enter either the IP of an NTP server on the local network or the IP of a DVR with its

NTP mode set to Server.

Interval

This menu is used to set the synchronization interval.

When NTP Mode is set to Client, Sync With NTP must be set to On.

6.8.4 Remote

DVR ID

This sets the address of the keyboard when operating all DVR functions with the controller

buttons. The default value is "1". If one keyboard is connected to several DVRs, it might conflict

with other channels, so a different value should be set for the keyboard address.

Summary of Contents for SVR-1645



























































































































Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands

Samsung SVR-1645, User Manual

Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands