Samsung SVR-1645 User Manual Download

Page: 102 / 122

User Manual

101

After the accounts have been configured, assign authority levels for each account. To allow

playback access, check "Hard" under the user's account in Configuration Tool. Also, to allow

accesses to "Microphone", "PTZ", "Relay", etc., check the relevant boxes and apply the

changes. To allow access to Ch.1 only, uncheck all boxes aside Ch.1.

7.4 Supported Browser

Web Viewer is optimized to Windows Internet Explorer 6.0 and higher.

Web viewer Installer

The installation program necessary to use Web Viewer is provided at the login page. For

computers without ActiveX, Web Viewer will install ActiveX to allow Web Viewer's functions to

work as intended.

Please close all programs related to Network Manager before installing Web

Viewer. Failure to do so may result in malfunction.

7.5 Monitor

Once provided with the correct ID and password combination, Web Viewer will automatically

move to the monitoring page. The monitoring page is used to watch live visual feed or to

perform other functions allowed with the account's authority level.

Detailed explanation and description of the features of the monitoring page is as follow.

7.5.1 Screen Partition & Image Movement

The monitoring page will display a partition mode according to the model.

Using the buttons shown above, the partition mode may shift from Single, 4, 9, 13 and 16

partitions. Clicking the monitoring area will change the partition mode to Single.

Summary of Contents for SVR-1645



























































































































Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands

Samsung SVR-1645, User Manual

Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands