Samsung SVR-1645 User Manual Download Page 107

Page: 107 / 122

User Manual

106

7.5.10 Audio Use

If a channel is paired with an audio channel, right-clicking the visual and selecting "Listen" from

the pop-up menu will activate audio input. Also, to listen to the audio signal, Mute also needs to

be unchecked.

7.5.11 Image Channel Close

Clicking the channel buttons to the left of the screen will disconnect the visual connection and

fade to black. To reconnect the channel, click the off channel button again.

7.6 Playback

Recorded data can be reviewed in the playback mode. Only users with HDD access may use

this mode. The playback mode uses 16 Partition screens and supports searches by time,

calendar and cycle. Also, paused streams may be printed or saved as .bmp image files.

Detailed explanation and description of the features of the playback page is as follow.

7.6.1 Screen Division & Channel Change

Summary of Contents for SVR-1645



























































































































Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands

Samsung SVR-1645, User Manual

Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands