Samsung SVR-1645 User Manual Download Page 74

Page: 74 / 122

User Manual

6.7.3 Digital I/O

Digital I/O are digital ports available for input and output at the same time., There are 12 digital

inputs and outputs.

Digital I/O Channel & Input/Output

All 12 channels can be set to input/output. When channels are set to input, if an input signal is

received by even one channel, emergency recording will operate. When they are set to output, if

sensor input is received, it will operate.

In Digital I/O Setup, if you set one of the 12 Digital I/O to [Input], set Input Type to [Emergency]

and turn Digital I/O on, the emergency recording will operate. The macro set in the event

recording is used for the recording. The recording will continue based on the value set in

[Recording After Event] under Event Recording and then stop.

※

SVR-480 does not support Digital I/O.

Summary of Contents for SVR-1645



























































































































Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands

Samsung SVR-1645, User Manual

Search results

Summary of Contents for SVR-1645

Reviews:

Related manuals for SVR-1645

Brands by name

Popular brands