VCR Operation
20
To make a copy, or “dub” of a video, you need two VCRs and two RCA-type cables.
Warning: One Federal Court has held that unauthorized recording of copyrighted TV programs may be an infringement of
copyright laws
1
Set your new Samsung VCR to record, and the other
VCR to play back. You have a choice between using the
LINE 1 jacks on the rear of the VCR, or the LINE 2 jacks
on the front of the VCR. If you use the LINE 2 jacks on
the front, the VCR will automatically switch the input
mode to Line 2. If necessary, you can change this by
pressing the LINE IN button on the remote control.
Note: If your VCR doesn’t have jacks on the front
[VR8509(C), VR8609(C)], “LINE” will be displayed
on the screen.
2
Attach one end of the first cable to the Video OUT jack
of the playback VCR and the other end to the Video In
jack of the record VCR.
3
Attach one end of the Audio cable to the Audio OUT
jacks on the playback VCR, and the other end to the
Audio IN jacks on the record VCR.
4
Press play on the playback VCR, and record on the
recording VCR.
Note: Rental tapes with Copyguard protection cannot
be copied. Before you copy a rental tape, check
first.
Copying or Dubbing a Video
LINE1
((LINE2))
