VCR Operation
15
The display function gives you information about the status of your VCR.
Location on screen
Display information
Upper left corner
The VCR function (play, stop or record).
Upper center
Audio Status
Upper right corner
Channel VCR is tuned to.
Lower left corner
Amount of time that has elapsed since
the counter was last reset.
Lower center corner
Tape speed (SP, SLP and ULP).
Lower right
Tape remaining graphic
Accessing the DISPLAY screen
1
Press the DISPLAY button while the cassette is playing or
recording. After approximately 3 seconds, the display
automatically changes, then only the counter and graphic
displays are shown.
2
Press the DISPLAY button to switch the counter mode
between showing the time remaining on the tape, and the
present time of day.
3
Press the DISPLAY button again to remove display from
the TV screen.
Note: In order for display information to be accurate, set up the tape length in the VCR Function Setup first (page 13).
0:01:30 SP
STOP
((MAIN))
6
Rem 4:59
0:01:30
Using the DISPLAY Button
