M a i n t e n a n c e
Clearing Clogs
Low suction or poor pickup may be due to a clog in the vaccum cleaner. If you notice a change in the sound of the motor
or a reduction in the spinning action, check for clogs.
1
Unplug cleaner from electrical outlet.
2
Empty Dirt Cup.
3
Check Case filter for build up or clogs.
4
Remove the Case filter and check the suction inlet for a clog.
5
Grasp the Quick Reach Handle and lift Hose Wand to separate from the
suction opening. Check for a clog in the Base, the Wand or the Hose.
6
Remove the screw attaching the Hose Wand Base to the vaccum.
Straighten the Hose Wand Base and unclog with long, narrow object.
7
Turn the vacuum cleaner off and unplug it. Remove the brush cover, check the air
passageway for obstructions. Remove debris from this area. Reposition brush cover
and eight screws. Tighten screws securely, snap end of brush cover into place.
Headlight Replacement
1
Disconnect cleaner from electrical outlet.
2
Unscrew the two screws on window lamp. then lift window lamp off.
3
Pull old bulb straight out of socket. Push new bulb straight into socket until locked in
place.
4
Place tabs on window lamp into slot. Press on window lamp and secure other tab.
5
Replace and tighten two screws.
11
