Vacuum Cleaner Assembly
Checking Parts
You should have the following items when you unpack your vacuum cleaner:
A. Owner’s manual
B. Handle section(with 4 screws)
C. Hose
D. Extension wands
(Telescopic, Friction)
E. Crevice tool
F. Cleaner body
G. Powered hand tool
(Turbine Brush)
H. Dusting Brush
I. Upholstery Brush
(Furniture nozzle)
Attaching Handle to cleaner
Attach Handle to Dirt cup
The dirt cup assembly consists of the following parts;
* Dirt cup (A)
* Handle (B)
1
Stand the vacuum upright and slide the base of the
handle firmly into the grooves at the top of the
vacuum body.
2
Check to be sure the handle is fitted to the cleaner
body. If there is a gap in front, continue to push
firmly until the handle is flush.
3
Insert the two screws provided into the existing
holes. Tighten the screws securely with a
screwdriver. Before securing the handle, please
check that the handle is fitted to the vacuum body
and there’s no gap between them. If there is a gap
or loosen the screw, cleaner won’t be turned on.
1
Release the dirt cup from cleaner body.
2
Insert the dirt cup handle into the dirt cup as shown
press firmly until handel locks in place.
3
Insert the dirt cup into the cleaner body.
A
A
B
B
C
D
E
F
G
H
I
4
