6
BARE
FLOO
R
HIGH
CARP
ET
2-7
BARE
FLOOR
HIGH
CARPET
2-8
Cleaning lightweight
flexible rugs
Stand on one end of rug and move
cleaner toward other end or edge.
before reaching edge, push down on
handle. This will lift up the
nozzle(front of cleaner)and will
prevent rug from clinging to cleaner.
Continue to lift front of cleaner so that
when you have reached the edge, it is
completely off the rug. Move cleaner
back to start again, lower front of
cleaner, and use only forward strokes.
2-6
A. Combination tool:
Two types of cleaning tools are
included in one attachment: rotate for
desired tool.
·
Use brush side to dust furniture,
blinds, books, lamps, shelves.
·
Use upholstery side for curtains,
draperies, cushions, fabrics.
B. Crevice tool:
Use in corners, on stairs, baseboards,
and behind furniture.
C. Extension Wand:
Use with desired attachments and
narrow wand for a longer reach.
D. Mini Turbo Brush :
Use rotating brush action for small
areas such as stairs and upholstery.
Note: Press gently when using Mini
Turbo Brush to gain maximum
cleaning. Too much pressure could
cause the brush to stop rotating.
✽
option
E. Wooden Floor Brush (Select Models):
Use for bare floors. Swivel head turns to get
into tight spaces and fits under cabinets.
Note: The Wooden Floor Brush does
not store on board.
Carrying handle
The cleaner can also be moved
by using the carrying handle.
2-4
Cleaning Tool attachments
Attachment tools can be used to
clean furniture or drapes, on stairs
or in corners.
When using the attachments,
ensure the vacuum cleaner is
placed firmly on the floor with the
handle in the upright position.
do not place the vacuum on top of
furniture or steps as the
brushroller may cause damage.
2-5
A
B
D
C
✽
option
E
Operation
Height adjustment
1. Place handle in upright position
2. Turn height adjustment dial(A) to desired setting.
bare Floor : For no-carpeted, bare floors.
low Setting : For short pile carpets.
Medium Setting : For short and medium pile carpets.
highest Setting : For plush pile carpet.
Note : For optimal cleaning performance, adjust to the lowest practical
setting.
If your cleaner is difficult to push, adjust to the next higher setting.
Always ensure that the correct height setting is used for your
flooring type as damage may occur if the height setting is not
changed to reflect your flooring type.
DJ68-00294R(0.0).indd 6
2011.4.1 2:17:40 PM
