5
Assembling Parts
Operation
2-1
2-2
2-3
ON-OFF Switch
1.To turn cleaner on, press the
Power switch.
2. To the cleaner off, press the
Power switch again.
Handle positions
The handle of your cleaner has
three positions;
upright
for storage
and when using cleaning tools;
operating
for general operation on
carpet and floors;
low
for reaching
under low furniture. Step on handle
release pedal to lower handle.
Transporting cleaner
To move your cleaner from room to
room, put the handle in upright
position, tilt the cleaner back on its
rear wheels and push forward.
Step 2. Attaching the Hose and Tools
Slide the extension wand
and the crevice tool
together into the storage
clip.
Attach the Mini Turbo
brush by putting the rib
at the bottom of Mini
Turbo brush on two
hooks of handle.
Snap Mini Turbo brush
into place as shown.
1-6
1-7
line up the tabs on the
base of the Twist Snap
hose with the
corresponding notches on
the hose collar as shown.
Slide the end of the
hose wand with tabs
into the hose Wand
base.
1-4
1-5
DJ68-00294R(0.0).indd 5
2011.4.1 2:17:38 PM
