Samsung SRD-440 User Manual Download Page 79

Page: 79 / 120

English

_79



WEB VIEWER

CONTROLLING PLAYBACK

Fast Backward

: Play the video reversely. (at x2 ~ x64)

Reverse Play

: Performs Reverse Play.

Play

: Performs playback.

Fast Forward

: Play the video forward. (at x2 ~ x64)

Go to First

: Moves the beginning time of recorded video in the time line.

Step Backward

: Performs one step reverseplay by one frame.

Pause

: Stops the playback temporarily.

Step Forward

: Performs one step forward by one frame.

Go to Last

: Moves the last time of recorded video in the time line.



Only the admin account can play the audio signal during the playback.
If using both web view and DVR set simultaneously, the audio signal will be
output from the DVR set.

VIEWER SETUP

You can configure the DVR settings remotely on the network.

To configure the DVR settings, click <

Setup

System

You can configure the various settings of the DVR system.

Date/Time/Language

For more information, refer to <

Date/Time/Language

> in the <

System Setup

> menu. (Page 28)

Select <

Date/Time/Language

> in the System menu.

Configure the DVR settings according to your system
environment.

•

Date/Time

Set the date and time.

Summary of Contents for SRD-440

























































































































Search results

Summary of Contents for SRD-440

Reviews:

Related manuals for SRD-440

Brands by name

Popular brands

Samsung SRD-440, User Manual

Search results

Summary of Contents for SRD-440

Reviews:

Related manuals for SRD-440

Brands by name

Popular brands