Samsung SRD-440 User Manual Download Page 13

Page: 13 / 120

English

_13



CONNECTING WITH OTHER DEVICE

CONNECTING THE VIDEO, AUDIO, AND MONITOR



Only one mouse port is available.

CONNECTING THE USB

By factory default, a USB port is provided for external connection.

You can connect a USB HDD, USB memory or mouse to the USB port.

If a USB HDD is connected to the system, recognition and settings are available in “

Setting the Device

Storage Device

”. (Page 40)

This product supports hot-plugging, which connects/removes the USB device during the system operation.



If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.

CONNECTING POS DEVICE

You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with
a RS-232C cable.

Connection setup for the RS-232C port is available in “

Device

POS Devices

”, press the

POS Device Setup

> button and set <

Baudrate, Parity, Data, Stop bit and Transfer Type

>. (Page 42)

1 COM

ALARM IN

NETWORK

USB

CONSOLE

VGA

SERIAL

AUDIO IN

AUDIO OUT

VIDEO OUT (SPOT)

VIDEO IN

DC 12 V

RS-485

ALARM OUT

Summary of Contents for SRD-440

























































































































Search results

Summary of Contents for SRD-440

Reviews:

Related manuals for SRD-440

Brands by name

Popular brands

Samsung SRD-440, User Manual

Search results

Summary of Contents for SRD-440

Reviews:

Related manuals for SRD-440

Brands by name

Popular brands