Samsung SRD-440 User Manual Download Page 21

Page: 21 / 120

English

_21



LIVE

Description

Scene Mode

Refer to “

Live Mode

”. (Page 23)

Spot Out

Refer to “

Spot Out

”. (Page 25)

Audio On/Off

Refer to “

Audio ON/OFF

”. (Page 26)

Freeze

Refer to “

Freeze

”. (Page 26)

Stop Alarm

Stop the alarm output, deactivate the event icon and release the auto sequencing.
Refer to “

Event Monitoring

”. (Page 26)

Record/Stop

Starts/stops the standard recording.

Play

Refer to “

Search & Play

Play

”. (Page 65)

Refer to “

Search & Play

”. (Page 62)

Backup

Refer to “

Using the DVR

Setting the Backup

”. (Page 52)

Main Menu

Accesses the main menu. Refer to the Using the DVR section. (Page 28)

Shutdown

Turns down the DVR.

Show/Hide Launcher

Shows or hides the launcher. Refer to “

View the Launcher Menu

”. (Page 22)

You can log in or out.

Single Mode Menu

The single mode menu is available only in Single Mode.
The context sensitive menu for the One Channel mode, in Split mode is different from that of the Single mode.

Description

Full Screen

Select and click a desired channel in Split mode to switch to the full screen of the selected
channel.

PTZ Control

Accesses the PTZ Control menu.
The PTZ menu will be active on Live screen if you select a single channel. (Page 60)

Zoom In

Enlarges the selected image. (Page 25)

2011-01-01 01:10:25

Full Screen

Spot Out



PTZ Control

Zoom In

Audio

Freeze

Stop Alarm

Record

Play

Shutdown

Hide Launcher

Logout

Summary of Contents for SRD-440

























































































































Search results

Summary of Contents for SRD-440

Reviews:

Related manuals for SRD-440

Brands by name

Popular brands

Samsung SRD-440, User Manual

Search results

Summary of Contents for SRD-440

Reviews:

Related manuals for SRD-440

Brands by name

Popular brands