Samsung SR8980, User Manual

Page: 32 / 60

32_ operating
Spot Cleaning
You can conveniently clean a specific area that has a a lot of
cookie crumbs, dust, and etc.
■
Move the Robot vacuum to the location where you want to perform a
spot clean.
Main unit button
Remote control
button
Configuration
Sequence
Normal Mode
Turbo Mode
Dust Sensor Mode
Cleaning Complete
2time
▶
1.
Set the mode.
2.
Cancel the mode.
- In Spot cleaning mode, the Robot vacuum cleans an area with a
length of 1.5m and a width of 1.5m.
- When cleaning is completed, the Robot vacuum will display End,
Stop, and Stand by.
When the Robot vacuum is docked with the Charger (Station)
spot cleaning is not supported.
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
Turbo icon is turned on, you can start cleaning in Turbo
mode.
• Each time you press the Dust Sensor button, the Dust
Sensor icon on the display panel is turned on or off
sequentially. When the Dust Sensor icon is turned on, you
can start cleaning in Dust Sensor mode.
NOTE
CAUTION
About 1.5m
About 1.5m
DJ68-00630D (EN)-00.indd 32 2014. 7. 23. �� 6:14