Samsung SR8980, User Manual

Page: 30 / 60

30_ operating
Recharging
You can have the Robot vacuum return to the Charger (Station)
to charge the battery by using the Recharging button.
■
When the Robot vacuum is operating, press the ( ) button to
cancel the operation and press the Recharging button.
1. Press the Recharging button.
- (“ ”) is displayed on the display panel and the Robot vacuum
returns to the charging station for recharging.
2.
To stop the Robot vacuum while it is returning to the Charger (Station),
press the (
) button.
3. To test the auto charge function, press the Recharging button when
the Robot vacuum is less than 1.5m from the Charger (Station).
Troubleshooting when the Robot vacuum does not return to
Charger (Station).
- Check the installation of Charger (Station).
- When the charger is in a location where the charger cannot guide
the Robot vacuum to Charger (Station)
- When the charger is more than 5m away from Robot vacuum.
: It may require a longer time for the Robot vacuum to return to
Charger (Station).
■
Manually charge the Robot vacuum in the following cases.
- When the charger is installed in a corner.
- When the battery is fully discharged.
- When the Robot vacuum is trapped by an obstacle (furniture etc.)
- When the Robot vacuum cannot pass over the doorsill to the
location where the Charger (Station) is installed.
1.5m ahead
Using the main unit
buttons
Using the remote
control
DJ68-00630D (EN)-00.indd 30 2014. 7. 23. �� 6:14