22_
operating
INSTALLING THE ROBOT VACUUM
Installation order
1. Turning the Power Switch on or off
To use the Robot vacuum, you must turn on the Power Switch at the
bottom of the main unit.
2. Installing the Charger (station)
To charge the Robot vacuum, you must first install the charger.
Since the battery is discharged when the product is purchased, you
must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the Robot
vacuum.
4. Setting the Time
You should set the time to use the Timer reservation and daily cleaning options.
5. Installing the VIRTUAL GUARD
You can confine the Robot vacuum to a particular section by using Fence (virtual wall) mode.
6. Installing the Samsung Smart Home Application
To use Home View, you must install Samsung Smart Home application and registering the
Robot vacuum.
Turning the Power Switch on or off
To use the Robot vacuum, you must turn the Power Switch on.
If you turn off the Power switch, all settings except for the current
time and the Daily reservations are reset.
1. Lift the body and turn on the power switch while making
sure not to press any other button.
- If the icons are not turned on, it indicates that the battery charge
is depleted. In this case, dock the Robot vacuum to the charger
station after turning the Power Switch on.
- The configured time may be different from the current time. If the
configure time is incorrect, set the time to the current time.
If the Power Switch is turned off, the Robot vacuum will not be
charged even if it is docked with the Charger (station).
CAUTION
Operating the cleaner
DJ68-00630D (EN)-00.indd 22
2014. 7. 23. �� 6:14
Summary of Contents for SR8980
Page 59: ...Memo...
